Newer
Older
This file describes changes in recent versions of SLURM. It primarily
documents those changes that are of interest to users and admins.
* Changes in SLURM 2.3.0.pre4
=============================
-- Add GraceTime to Partition and QOS data structures. Preempted jobs will be
given this time interval before termination. Work by Bill Brophy, Bull.
-- Add the ability for scontrol and sview to modify slurmctld DebugFlags
values.
-- Various Cray-specific patches:
- Fix a bug in distinguishing XT from XE.
- Avoids problems with empty nodenames on Cray.
- Check whether ALPS is hanging on to nodes, which happens if ALPS has not
yet cleaned up the node partition.
- Stops select/cray from clobbering node_ptr->reason.
- Perform 'safe' release of ALPS reservations using inventory and apkill.
- Compile-time sanity check for the apbasil and apkill files.
- Changes error handling in do_basil_release() (called by
select_g_job_fini()).
- Warn that salloc --no-shell option is not supported on Cray systems.
-- Add a reservation flag of "License_Only". If set, then jobs using the
reservation may use the licenses associated with it plus any compute nodes.
Otherwise the job is limited to the compute nodes associated with the
reservation.
-- Change slurm.conf node configuration parameter from "Procs" to "CPUs".
Both parameters will be supported for now.
Danny Auble
committed
-- BLUEGENE - fix for when user requests only midplane names with no count at
job submission time to process the node count correctly.
-- Fix job step resource allocation problem when both node and tasks counts
are specified. New logic selects nodes with larger CPU counts as needed.
Danny Auble
committed
-- BGQ - make it so srun wraps runjob (still under construction, but works
for most cases)
* Changes in SLURM 2.3.0.pre3
=============================
-- BGQ - Appears to work correctly in emulation mode, no sub blocks just yet.
-- Minor typos fixed
-- Various bug fixes for Cray systems.
-- Fix bug that when setting a compute node to idle state, it was failing to
set the systems up_node_bitmap.
-- BLUEGENE - code reorder
-- BLUEGENE - Now only one select plugin for all Bluegene systems.
-- Modify srun to set the SLURM_JOB_NAME environment variable when srun is
used to create a new job allocation. Not set when srun is used to create a
job step within an existing job allocation.
-- Modify init.d/slurm script to start multiple slurmd daemons per compute
node if so configured. Patch from Matthieu Hautreux, CEA.
-- Change license data structure counters from uint16_t to uint32_t to support
larger license counts.
* Changes in SLURM 2.3.0.pre2
=============================
-- Log a job's requeue or cancellation due to preemption to that job's stderr:
"*** JOB 65547 CANCELLED AT 2011-01-21T12:59:33 DUE TO PREEMPTION ***".
-- Added new job termination state of JOB_PREEMPTED, "PR" or "PREEMPTED" to
indicate job termination was due to preemption.
-- Optimize advanced reservations resource selection for computer topology.
The logic has been added to select/linear and select/cons_res, but will
not be enabled until the other select plugins are modified.
-- Disable deletion of partitions that have unfinished jobs (pending,
running or suspended states). Patch from Martin Perry, BULL.
-- In sview, disable the sorting of node records by name at startup for
clusters over 1000 nodes. Users can enable this by selecting the "Name"
tab. This change dramatically improves scalability of sview.
-- Report error when trying to change a node's state from scontrol for Cray
-- Do not attempt to read the batch script for non-batch jobs. This patch
eliminates some inappropriate error messages.
-- Preserve NodeHostName when reordering nodes due to system topology.
-- On Cray/ALPS systems do node inventory before scheduling jobs.
-- Disable some salloc options on Cray systems.
-- Disable scontrol's wait_job command on Cray systems.
-- Disable srun command on native Cray/ALPS systems.
Danny Auble
committed
-- Updated configure option "--enable-cray-emulation" (still under
development) to emulate a cray XT/XE system, and auto-detect a real
Cray XT/XE systems (removed no longer needed --enable-cray configure
option). Building on native Cray systems requires the
cray-MySQL-devel-enterprise rpm and expat XML parser library/headers.
* Changes in SLURM 2.3.0.pre1
=============================
-- Added that when a slurmctld closes the connection to the database it's
registered host and port are removed.
-- Added flag to slurmdbd.conf TrackSlurmctldDown where if set will mark idle
resources as down on a cluster when a slurmctld disconnects or is no
longer reachable.
-- Added support for more than one front-end node to run slurmd on
architectures where the slurmd does not execute on the compute nodes
(e.g. BlueGene). New configuration parameters FrontendNode and FrontendAddr
added. See "man slurm.conf" for more information.
-- With the scontrol show job command when using the --details option, show
a batch job's script.
-- Add ability to create reservations or partitions and submit batch jobs
using sview. Also add the ability to delete reservations and partitions.
-- Added new configuration parameter MaxJobId. Once reached, restart job ID
values at FirstJobId.
-- When restarting slurmctld with priority/basic, increment all job priorities
so the highest job priority becomes TOP_PRIORITY.
-- For batch jobs for which the Prolog fails, substitute the job ID for any
"%j" in the job's output or error file specification.
-- Add licenses field to the sview reservation information.
-- BLUEGENE - Fix for handling extremely overloaded system on Dynamic system
dealing with starting jobs on overlapping blocks. Previous fallout
was job would be requeued. (happens very rarely)
-- In accounting_storage/filetxt plugin, substitute spaces within job names,
step names, and account names with an underscore to insure proper parsing.
-- When building contribs/perlapi ignore both INSTALL_BASE and PERL_MM_OPT.
Use PREFIX instead to avoid build errors from multiple installation
specifications.
-- Add job_submit/cnode plugin to support resource reservations of less than
a full midplane on BlueGene computers. Treat cnodes as liceses which can
be reserved and are consumed by jobs. This reservation mechanism for less
than an entire midplane is still under development.
-- Clear a job's "reason" field when a held job is released.
-- When releasing a held job, calculate a new priority for it rather than
just setting the priority to 1.
Danny Auble
committed
-- Fix for sview started on a non-bluegene system to pick colors correctly
when talking to a real bluegene system.
-- Improve sched/backfill's expected start time calculation.
-- Prevent abort of sacctmgr for dump command with invalid (or no) filename.
Danny Auble
committed
-- Improve handling of job updates when using limits in accounting, and
updating jobs as a non-admin user.
-- Fix for "squeue --states=all" option. Bug would show no jobs.
-- Schedule jobs with reservations before those without reservations.
-- Fix squeue/scancel to query correctly against accounts of different case.
-- Abort an srun command when it's associated job gets aborted due to a
dependency that can not be satisfied.
-- In jobcomp plugins, report start time of zeroif pending job is cancelled.
Previously may report expected start time.
-- Fixed sacctmgr man to state correct variables.
* Changes in SLURM 2.2.3
========================
-- Update srun, salloc, and sbatch man page description of --distribution
option. Patches from Rod Schulz, Bull.
-- Applied patch from Martin Perry to fix "Incorrect results for task/affinity
block second distribution and cpus-per-task > 1" bug.
-- Avoid setting a job's eligible time while held (priority == 0).
-- Substantial performance improvement to backfill scheduling. Patch from
Bjorn-Helge Mevik, University of Oslo.
-- Make timeout for communications to the slurmctld be based upon the
MessageTimeout configuration parameter rather than always 3 seconds.
Patch from Matthieu Hautreux, CEA.
-- Add new scontrol option of "show aliases" to report every NodeName that is
associated with a given NodeHostName when running multiple slurmd daemons
per compute node (typically used for testing purposes). Patch from
Matthieu Hautreux, CEA.
-- Fix for handling job names with a "'" in the name within MySQL accounting.
Patch from Gerrit Renker, CSCS.
-- Modify condition under which salloc execution delayed until moved to the
foreground. Patch from Gerrit Renker, CSCS.
Job control for interactive salloc sessions: only if ...
a) input is from a terminal (stdin has valid termios attributes),
b) controlling terminal exists (non-negative tpgid),
c) salloc is not run in allocation-only (--no-shell) mode,
d) salloc runs in its own process group (true in interactive
shells that support job control),
e) salloc has been configured at compile-time to support background
execution and is not currently in the background process group.
-- Abort salloc if no controlling terminal and --no-shell option is not used
("setsid salloc ..." is disabled). Patch from Gerrit Renker, CSCS.
-- Fix to gang scheduling logic which could cause jobs to not be suspended
or resumed when appropriate.
-- Applied patch from Martin Perry to fix "Slurmd abort when using task
affinity with plane distribution" bug.
-- Applied patch from Yiannis Georgiou to fix "Problem with cpu binding to
sockets option" behaviour. This change causes "--cpu_bind=sockets" to bind
tasks only to the CPUs on each socket allocated to the job rather than all
CPUs on each socket.
-- Advance daily or weekly reservations immediately after termination to avoid
having a job start that runs into the reservation when later advanced.
-- Fix for enabling users to change there own default account, wckey, or QOS.
Danny Auble
committed
-- BLUEGENE - If using OVERLAP mode fixed issue with multiple overlapping
blocks in error mode.
-- Fix for sacctmgr to display correctly default accounts.
-- scancel -s SIGKILL will always sent the RPC to the slurmctld rather than
the slurmd daemon(s). This insures that tasks in the process of getting
spawned are killed.
-- BLUEGENE - If using OVERLAP mode fixed issue with jobs getting denied
at submit if the only option for their job was overlapping a block in
error state.
* Changes in SLURM 2.2.2
========================
-- Correct logic to set correct job hold state (admin or user) when setting
the job's priority using scontrol's "update jobid=..." rather than its
"hold" or "holdu" commands.
-- Modify squeue to report unset --mincores, --minthreads or --extra-node-info
values as "*" rather than 65534. Patch from Rod Schulz, BULL.
-- Report the StartTime of a job as "Unknown" rather than the year 2106 if its
expected start time was too far in the future for the backfill scheduler
to compute.
-- Prevent a pending job reason field from inappropriately being set to
"Priority".
-- In sched/backfill with jobs having QOS_FLAG_NO_RESERVE set, then don't
consider the job's time limit when attempting to backfill schedule. The job
Loading
Loading full blame...