diff --git a/doc.zih.tu-dresden.de/docs/data_transfer/object_storage.md b/doc.zih.tu-dresden.de/docs/data_transfer/object_storage.md
new file mode 100644
index 0000000000000000000000000000000000000000..22858fb9e96746016b5ad12eaef2485572061a62
--- /dev/null
+++ b/doc.zih.tu-dresden.de/docs/data_transfer/object_storage.md
@@ -0,0 +1,336 @@
+# Transfer Data between ZIH Systems and Object Storage (S3)
+
+Object Storage is an alternative to normal filesystem storage. It can be accessed via HTTPS and can
+therefor be used where direct `scp` connections are prohibited, e.g. when one wants to copy data to
+another data center. Access is provided on request via the corresponding
+[self service page on object storage](https://selfservice.tu-dresden.de/services/objectstorage/).
+The access key (`Zugriffsschlüssel`) and the secret key (`Geheimer Schlüssel`) are required later
+when copying data to it.
+
+Access to object storage is possible on ZIH systems via the module `rclone`:
+
+```console
+marie@login$ module load rclone
+```
+
+## Initial Configuration
+
+Before you use `rclone` for the first time, you have to configure it. This is done interactively as
+shown below. Replace `REPLACE_ME_WITH_ACCESS_KEY` and `REPLACE_ME_WITH_SECRET_KEY` with the values
+from the self service portal:
+
+```console
+marie@login$ rclone config
+2023/03/22 09:35:55 NOTICE: Config file "/home/marie/.config/rclone/rclone.conf" not found - using defaults
+No remotes found, make a new one?
+n) New remote
+s) Set configuration password
+q) Quit config
+n/s/q> n
+
+Enter name for new remote.
+name> s3store
+
+Option Storage.
+Type of storage to configure.
+Choose a number from below, or type in your own value.
+ 1 / 1Fichier
+   \ (fichier)
+ 2 / Akamai NetStorage
+   \ (netstorage)
+ 3 / Alias for an existing remote
+   \ (alias)
+ 4 / Amazon Drive
+   \ (amazon cloud drive)
+ 5 / Amazon S3 Compliant Storage Providers including AWS, Alibaba, Ceph, China Mobile, Cloudflare, ArvanCloud, Digital Ocean, Dreamhost, Huawei OBS, IBM COS, IDrive e2, IONOS Cloud, Lyve Cloud, Minio, Netease, RackCorp, Scaleway, SeaweedFS, StackPath, Storj, Tencent COS, Qiniu and Wasabi
+   \ (s3)
+ 6 / Backblaze B2
+   \ (b2)
+ 7 / Better checksums for other remotes
+   \ (hasher)
+ 8 / Box
+   \ (box)
+ 9 / Cache a remote
+   \ (cache)
+10 / Citrix Sharefile
+   \ (sharefile)
+11 / Combine several remotes into one
+   \ (combine)
+12 / Compress a remote
+   \ (compress)
+13 / Dropbox
+   \ (dropbox)
+14 / Encrypt/Decrypt a remote
+   \ (crypt)
+15 / Enterprise File Fabric
+   \ (filefabric)
+16 / FTP
+   \ (ftp)
+17 / Google Cloud Storage (this is not Google Drive)
+   \ (google cloud storage)
+18 / Google Drive
+   \ (drive)
+19 / Google Photos
+   \ (google photos)
+20 / HTTP
+   \ (http)
+21 / Hadoop distributed file system
+   \ (hdfs)
+22 / HiDrive
+   \ (hidrive)
+23 / In memory object storage system.
+   \ (memory)
+24 / Internet Archive
+   \ (internetarchive)
+25 / Jottacloud
+   \ (jottacloud)
+26 / Koofr, Digi Storage and other Koofr-compatible storage providers
+   \ (koofr)
+27 / Local Disk
+   \ (local)
+28 / Mail.ru Cloud
+   \ (mailru)
+29 / Mega
+   \ (mega)
+30 / Microsoft Azure Blob Storage
+   \ (azureblob)
+31 / Microsoft OneDrive
+   \ (onedrive)
+32 / OpenDrive
+   \ (opendrive)
+33 / OpenStack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
+   \ (swift)
+34 / Oracle Cloud Infrastructure Object Storage
+   \ (oracleobjectstorage)
+35 / Pcloud
+   \ (pcloud)
+36 / Put.io
+   \ (putio)
+37 / QingCloud Object Storage
+   \ (qingstor)
+38 / SMB / CIFS
+   \ (smb)
+39 / SSH/SFTP
+   \ (sftp)
+40 / Sia Decentralized Cloud
+   \ (sia)
+41 / Storj Decentralized Cloud Storage
+   \ (storj)
+42 / Sugarsync
+   \ (sugarsync)
+43 / Transparently chunk/split large files
+   \ (chunker)
+44 / Union merges the contents of several upstream fs
+   \ (union)
+45 / Uptobox
+   \ (uptobox)
+46 / WebDAV
+   \ (webdav)
+47 / Yandex Disk
+   \ (yandex)
+48 / Zoho
+   \ (zoho)
+49 / premiumize.me
+   \ (premiumizeme)
+50 / seafile
+   \ (seafile)
+Storage> 5
+
+Option provider.
+Choose your S3 provider.
+Choose a number from below, or type in your own value.
+Press Enter to leave empty.
+ 1 / Amazon Web Services (AWS) S3
+   \ (AWS)
+ 2 / Alibaba Cloud Object Storage System (OSS) formerly Aliyun
+   \ (Alibaba)
+ 3 / Ceph Object Storage
+   \ (Ceph)
+ 4 / China Mobile Ecloud Elastic Object Storage (EOS)
+   \ (ChinaMobile)
+ 5 / Cloudflare R2 Storage
+   \ (Cloudflare)
+ 6 / Arvan Cloud Object Storage (AOS)
+   \ (ArvanCloud)
+ 7 / Digital Ocean Spaces
+   \ (DigitalOcean)
+ 8 / Dreamhost DreamObjects
+   \ (Dreamhost)
+ 9 / Huawei Object Storage Service
+   \ (HuaweiOBS)
+10 / IBM COS S3
+   \ (IBMCOS)
+11 / IDrive e2
+   \ (IDrive)
+12 / IONOS Cloud
+   \ (IONOS)
+13 / Seagate Lyve Cloud
+   \ (LyveCloud)
+14 / Minio Object Storage
+   \ (Minio)
+15 / Netease Object Storage (NOS)
+   \ (Netease)
+16 / RackCorp Object Storage
+   \ (RackCorp)
+17 / Scaleway Object Storage
+   \ (Scaleway)
+18 / SeaweedFS S3
+   \ (SeaweedFS)
+19 / StackPath Object Storage
+   \ (StackPath)
+20 / Storj (S3 Compatible Gateway)
+   \ (Storj)
+21 / Tencent Cloud Object Storage (COS)
+   \ (TencentCOS)
+22 / Wasabi Object Storage
+   \ (Wasabi)
+23 / Qiniu Object Storage (Kodo)
+   \ (Qiniu)
+24 / Any other S3 compatible provider
+   \ (Other)
+provider> 24
+
+Option env_auth.
+Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
+Only applies if access_key_id and secret_access_key is blank.
+Choose a number from below, or type in your own boolean value (true or false).
+Press Enter for the default (false).
+ 1 / Enter AWS credentials in the next step.
+   \ (false)
+ 2 / Get AWS credentials from the environment (env vars or IAM).
+   \ (true)
+env_auth> 1
+
+Option access_key_id.
+AWS Access Key ID.
+Leave blank for anonymous access or runtime credentials.
+Enter a value. Press Enter to leave empty.
+access_key_id> REPLACE_ME_WITH_ACCESS_KEY
+
+Option secret_access_key.
+AWS Secret Access Key (password).
+Leave blank for anonymous access or runtime credentials.
+Enter a value. Press Enter to leave empty.
+secret_access_key> REPLACE_ME_WITH_SECRET_KEY
+
+Option region.
+Region to connect to.
+Leave blank if you are using an S3 clone and you don't have a region.
+Choose a number from below, or type in your own value.
+Press Enter to leave empty.
+   / Use this if unsure.
+ 1 | Will use v4 signatures and an empty region.
+   \ ()
+   / Use this only if v4 signatures don't work.
+ 2 | E.g. pre Jewel/v10 CEPH.
+   \ (other-v2-signature)
+region> 1
+
+Option endpoint.
+Endpoint for S3 API.
+Required when using an S3 clone.
+Enter a value. Press Enter to leave empty.
+endpoint> s3.zih.tu-dresden.de
+
+Option location_constraint.
+Location constraint - must be set to match the Region.
+Leave blank if not sure. Used when creating buckets only.
+Enter a value. Press Enter to leave empty.
+location_constraint> 
+
+Option acl.
+Canned ACL used when creating buckets and storing or copying objects.
+This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.
+For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
+Note that this ACL is applied when server-side copying objects as S3
+doesn't copy the ACL from the source but rather writes a fresh one.
+Choose a number from below, or type in your own value.
+Press Enter to leave empty.
+   / Owner gets FULL_CONTROL.
+ 1 | No one else has access rights (default).
+   \ (private)
+   / Owner gets FULL_CONTROL.
+ 2 | The AllUsers group gets READ access.
+   \ (public-read)
+   / Owner gets FULL_CONTROL.
+ 3 | The AllUsers group gets READ and WRITE access.
+   | Granting this on a bucket is generally not recommended.
+   \ (public-read-write)
+   / Owner gets FULL_CONTROL.
+ 4 | The AuthenticatedUsers group gets READ access.
+   \ (authenticated-read)
+   / Object owner gets FULL_CONTROL.
+ 5 | Bucket owner gets READ access.
+   | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
+   \ (bucket-owner-read)
+   / Both the object owner and the bucket owner get FULL_CONTROL over the object.
+ 6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
+   \ (bucket-owner-full-control)
+acl> 1
+
+Edit advanced config?
+y) Yes
+n) No (default)
+y/n> n
+```
+
+## Copying Data from/to Object Storage
+
+The following commands show how to create a bucket `mystorage` in your part of the object store:
+
+```console
+marie@login$ module load rclone
+marie@login$ rclone mkdir s3store:mystorage
+```
+
+After these commands, you can copy a file, e. g. `largedata.tar.gz`, to it in a separate job with
+the help of the [Datamover](datamover.md). Adjust the parameters `time` and `account` as required:
+
+```console
+marie@login$ dtrclone --time=0:10:00 --account=p_number_crunch copy --s3-acl "public-read" largedata.tar.gz s3store:mystorage
+```
+
+!!! warning "Restricted access"
+
+    If you want to restrict access to your data, replace the last command with:
+
+    ```console
+    marie@login$ dtrclone --time=0:10:00 --account=p_number_crunch copy largedata.tar.gz s3store:mystorage
+    ```
+
+    Then, it is not possible to access your data without providing your credentials.
+
+For small files, you can also directly copy data:
+
+```console
+marie@login$ module load rclone
+marie@login$ rclone copy --s3-acl "public-read" largedata.tar.gz s3store:mystorage
+```
+
+## Accessing the Object Storage
+
+The following commands show different possibilities to access a file from object storage.
+
+### Copying a File from Object Storage to ZIH systems
+
+```console
+marie@login$ dtrclone --time=0:10:00 --account=p_number_crunch copy s3store:mystorage/largedata.tar.gz .
+```
+
+### Copying a File from Object Storage to Your Workstation
+
+The following command assumes you have installed the command `s3cmd`, please also see the
+[s3cmd Installation Instructions](https://tu-dresden.de/zih/dienste/service-katalog/arbeitsumgebung/datenspeicher/objektspeicher-s3)
+
+```console
+marie@local$ s3cmd get s3://mystorage/largedata.tar.gz
+```
+
+### Accessing a Public-Readable File
+
+It is possible to copy a public-readable file via `wget` or similar command line tools. Replace
+`$USER` with your ZIH account.
+
+```console
+marie@somewhere$ wget https://s3.zih.tu-dresden.de/$USER:mystorage/largedata.tar.gz
+```
diff --git a/doc.zih.tu-dresden.de/mkdocs.yml b/doc.zih.tu-dresden.de/mkdocs.yml
index d05959ffab8c63bfcdbf9718e04a4a602b52d002..3e424e9894e8ee37e91de55edfd3ecc4d679a239 100644
--- a/doc.zih.tu-dresden.de/mkdocs.yml
+++ b/doc.zih.tu-dresden.de/mkdocs.yml
@@ -27,6 +27,7 @@ nav:
     - Overview: data_transfer/overview.md
     - Transfer Data Inside ZIH Systems with Datamover: data_transfer/datamover.md
     - Transfer Data to/from ZIH Systems via Export Nodes: data_transfer/export_nodes.md
+    - Transfer Data between ZIH Systems and Object Storage (S3): data_transfer/object_storage.md
   - Data Life Cycle Management:
     - Overview: data_lifecycle/overview.md
     - Filesystems:
diff --git a/doc.zih.tu-dresden.de/util/grep-forbidden-patterns.sh b/doc.zih.tu-dresden.de/util/grep-forbidden-patterns.sh
index e8cd43a27ecd78a230bb8f2890a6ae68b7c71dba..dba8b694d3dcbc6a26132477170b610736f0da0d 100755
--- a/doc.zih.tu-dresden.de/util/grep-forbidden-patterns.sh
+++ b/doc.zih.tu-dresden.de/util/grep-forbidden-patterns.sh
@@ -3,16 +3,21 @@
 set -euo pipefail
 
 scriptpath=${BASH_SOURCE[0]}
-basedir=`dirname "$scriptpath"`
-basedir=`dirname "$basedir"`
+basedir=`dirname "${scriptpath}"`
+basedir=`dirname "${basedir}"`
 
-#This is the ruleset. Each rule consists of a message (first line), a tab-separated list of files to skip (second line) and a pattern specification (third line).
+#This is the ruleset. Each rule consists of a message (first line), a tab-
+# separated list of files to skip (second line) and a pattern specification
+# (third line).
 #A pattern specification is a tab-separated list of fields:
-#The first field represents whether the match should be case-sensitive (s) or insensitive (i).
-#The second field represents the pattern that should not be contained in any file that is checked.
+#The first field represents whether the match should be case-sensitive (s) or
+# insensitive (i).
+#The second field represents the pattern that should not be contained in any
+# file that is checked.
 #Further fields represent patterns with exceptions.
 #For example, the first rule says:
-# The pattern \<io\> should not be present in any file (case-insensitive match), except when it appears as ".io".
+# The pattern \<io\> should not be present in any file (case-insensitive
+# match), except when it appears as ".io".
 ruleset="The word \"IO\" should not be used, use \"I/O\" instead.
 doc.zih.tu-dresden.de/docs/contrib/content_rules.md
 i	\<io\>	\.io
@@ -21,7 +26,7 @@ doc.zih.tu-dresden.de/docs/contrib/content_rules.md
 s	\<SLURM\>
 \"File system\" should be written as \"filesystem\", except when used as part of a proper name.
 doc.zih.tu-dresden.de/docs/contrib/content_rules.md
-i	file \+system	HDFS
+i	file \+system	HDFS	Hadoop distributed file system
 Use \"ZIH systems\" or \"ZIH system\" instead of \"Taurus\". \"taurus\" is only allowed when used in ssh commands and other very specific situations.
 doc.zih.tu-dresden.de/docs/contrib/content_rules.md	doc.zih.tu-dresden.de/docs/archive/phase2_migration.md
 i	\<taurus\>	taurus\.hrsk	/taurus	/TAURUS	ssh	^[0-9]\+:Host taurus$
@@ -48,7 +53,7 @@ Add table column headers.
 i	^[ |]*|$
 Avoid spaces at end of lines.
 doc.zih.tu-dresden.de/docs/accessibility.md
-i	[[:space:]]$
+i	[[:space:]]$	[[:alnum:]]\+> $
 When referencing projects, please use p_number_crunch for consistency.
 
 i	\<p_	p_number_crunch	p_long_computations
@@ -68,49 +73,54 @@ Use \"workspace\" instead of \"work space\" or \"work-space\".
 doc.zih.tu-dresden.de/docs/contrib/content_rules.md
 i	work[ -]\+space"
 
-function grepExceptions () {
+function grep_exceptions () {
   if [ $# -gt 0 ]; then
     firstPattern=$1
     shift
-    grep -v "$firstPattern" | grepExceptions "$@"
+    grep -v "${firstPattern}" | grep_exceptions "$@"
   else
     cat -
   fi
 }
 
-function checkFile(){
+function check_file(){
   f=$1
-  echo "Check wording in file $f"
+  echo "Check wording in file ${f}"
   while read message; do
     IFS=$'\t' read -r -a files_to_skip
     skipping=""
-    if (printf '%s\n' "${files_to_skip[@]}" | grep -xq $f); then
+    if (printf '%s\n' "${files_to_skip[@]}" | grep -xq ${f}); then
       skipping=" -- skipping"
     fi
     IFS=$'\t' read -r flags pattern exceptionPatterns
     while IFS=$'\t' read -r -a exceptionPatternsArray; do
-      #Prevent patterns from being printed when the script is invoked with default arguments.
-      if [ $verbose = true ]; then
-        echo "  Pattern: $pattern$skipping"
+      # Prevent patterns from being printed when the script is invoked with
+      # default arguments.
+      if [ ${verbose} = true ]; then
+        echo "  Pattern: ${pattern}${skipping}"
       fi
-      if [ -z "$skipping" ]; then
+      if [ -z "${skipping}" ]; then
         grepflag=
-        case "$flags" in
+        case "${flags}" in
           "i")
             grepflag=-i
           ;;
         esac
-        if grep -n $grepflag $color "$pattern" "$f" | grepExceptions "${exceptionPatternsArray[@]}" ; then
-          number_of_matches=`grep -n $grepflag $color "$pattern" "$f" | grepExceptions "${exceptionPatternsArray[@]}" | wc -l`
+        if grep -n ${grepflag} ${color} "${pattern}" "${f}" \
+         | grep_exceptions "${exceptionPatternsArray[@]}" ; then
+          number_of_matches=`grep -n ${grepflag} ${color} "${pattern}" "${f}" \
+                           | grep_exceptions "${exceptionPatternsArray[@]}" \
+                           | wc -l`
           ((cnt=cnt+$number_of_matches))
-          #prevent messages when silent=true, only files, pattern matches and the summary are printed
-          if [ $silent = false ]; then
-            echo "    $message"
+          # prevent messages when silent=true,
+          # only files, pattern matches and the summary are printed
+          if [ ${silent} = false ]; then
+            echo "    ${message}"
           fi
         fi
       fi
-    done <<< $exceptionPatterns
-  done <<< $ruleset
+    done <<< ${exceptionPatterns}
+  done <<< ${ruleset}
 }
 
 function usage () {
@@ -137,7 +147,7 @@ verbose=false
 file=""
 color=""
 while getopts ":ahsf:cv" option; do
- case $option in
+ case ${option} in
    a)
      all_files=true
      ;;
@@ -166,40 +176,41 @@ done
 
 branch="origin/${CI_MERGE_REQUEST_TARGET_BRANCH_NAME:-preview}"
 
-if [ $all_files = true ]; then
+if [ ${all_files} = true ]; then
   echo "Search in all markdown files."
-  files=$(git ls-tree --full-tree -r --name-only HEAD $basedir/ | grep .md)
-elif [[ ! -z $file ]]; then
-  files=$file
+  files=$(git ls-tree --full-tree -r --name-only HEAD ${basedir}/ | grep .md)
+elif [[ ! -z ${file} ]]; then
+  files=${file}
 else
   echo "Search in git-changed files."
-  files=`git diff --name-only "$(git merge-base HEAD "$branch")"`
+  files=`git diff --name-only "$(git merge-base HEAD "${branch}")"`
 fi
 
-#Prevent files from being printed when the script is invoked with default arguments.
-if [ $verbose = true ]; then
-echo "... $files ..."
+#Prevent files from being printed when the script is invoked with default
+# arguments.
+if [ ${verbose} = true ]; then
+echo "... ${files} ..."
 fi
 cnt=0
-if [[ ! -z $file ]]; then
-  checkFile $file
+if [[ ! -z ${file} ]]; then
+  check_file ${file}
 else
-  for f in $files; do
-    if [ "${f: -3}" == ".md" -a -f "$f" ]; then
-      checkFile $f
+  for f in ${files}; do
+    if [ "${f: -3}" == ".md" -a -f "${f}" ]; then
+      check_file ${f}
     fi
   done
 fi
 
 echo "" 
-case $cnt in
+case ${cnt} in
   1)
     echo "Forbidden Patterns: 1 match found"
   ;;
   *)
-    echo "Forbidden Patterns: $cnt matches found"
+    echo "Forbidden Patterns: ${cnt} matches found"
   ;;
 esac
-if [ $cnt -gt 0 ]; then
+if [ ${cnt} -gt 0 ]; then
   exit 1
 fi
diff --git a/doc.zih.tu-dresden.de/wordlist.aspell b/doc.zih.tu-dresden.de/wordlist.aspell
index 775ad216f730f61294932a87fe39d486ba26246a..f52773abff6bcf0af4e2d79e3f3bc1a12090eed6 100644
--- a/doc.zih.tu-dresden.de/wordlist.aspell
+++ b/doc.zih.tu-dresden.de/wordlist.aspell
@@ -12,8 +12,8 @@ Altix
 Altra
 Amber
 Amdahl's
-Analytics
 analytics
+Analytics
 anonymized
 Ansys
 APIs
@@ -40,6 +40,7 @@ Chemnitz
 citable
 CLI
 CMake
+cmd
 COMSOL
 conda
 config
@@ -163,6 +164,7 @@ HPE
 HPL
 HRSK
 html
+HTTPS
 hvd
 hyperparameter
 hyperparameters